Go back to Product Documents Navigation 

 Go back to Powerbrick 10-in-1 Documents Navigation 

This is a button module, it detects whether the buttons are pressed.When the buttons are pressed, the corresponding LED on the back would light up. The buttons are compatible with LEGO Technic axis.

Details

Specification

• Voltage: 3V-5V
• Dimensions: 56mm X 24mm X 25mm
• Connector: 4Pin PH2.0
• Type: Digital Module

Precautions

• The module should be as close to the ground as possible.
• The ground or table must have a non-reflective surface.

Connecting the module

Connect the module to the Armourbit using a 4Pin Cable.

MakeCode Coding Tutorial

Powerbrick Extension: https://github.com/KittenBot/pxt-powerbrick

Loading Extensions

AB Button Module Blocks

Buttons Detection

Sample Code Link

Extension Version and Updates

There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.

Makecode Extension Update

Makecode Tutorial Video

KittenBlock Coding Tutorial

Load Powerbrick Extension

Select Powerbrick from the hardware column.

AB Button Module Blocks

Buttons Detection

Sample Code Download

FAQ

1：Why is there no reaction when I click the blocks?

Make sure you have connected the Micro:bit correctly and flash the firmware again.

If you have any question, please feel free to contact us at Discord, we will always be there to help.

KittenBot Team

 Go back to Product Documents Navigation 

 Go back to Powerbrick 10-in-1 Documents Navigation