Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
This module combines ultrasound sensor and a microphone into the same module. The ultrasound sensor is used to measure the distance of objects, the microphone is used to measure the loudness.
Details
Specifications
- Voltage: 3V-5V
- Dimensions: 56mm X 24mm X 16mm
- Connector: 4Pin PH2.0
- Ultrasound Detection Range: 4cm-200cm(Recommended)
- Analog Return Value Range: 0-1023
Precautions
- Ultrasound works better on items with smooth surfaces, the smooth surface should be perpendicular to the module.
- Ultrasound emits signal in the shape of an arc, make sure there is no obstacle in the signal range.
- The microphone only determines loudness of a sound, it can’t measure decibels. Measuring decibels require professional equipment.
Connecting the module
Connect the Ultrasound Module to Armourbit with a 4Pin cable.
MakeCode Coding Tutorial
Powerbrick Extension: https://github.com/KittenBot/pxt-powerbrick
Environment Module Blocks:
Measuring distance
Measuring ambient noise
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
Makecode Tutorial Video
KittenBlock Coding Tutorial
Load Powerbrick Extension
Select Powerbrick from the hardware column.
Environment Module Blocks
Measuring distance
Measuring ambient noise
FAQ
1：Why is there no reaction when I click the blocks?
Make sure you have connected the Micro:bit correctly and flash the firmware again.
If you have any question, please feel free to contact us at Discord, we will always be there to help.
KittenBot Team
Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation